Skip to main content
9단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Next, flip the board over so you can see the back side. There should be 3 ribbons attached to the circuit board. (In the picture the white one was not attached as it easily came out when I flipped the board over.) Remove these ribbons from their connectors by simply pulling them out. The circuit board should fully separate from the frame holding the screen now.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.