주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

I couldn't find anything suitable in the internet, so I built one on my own in this way:

Using a steel rod of about 8 mm diameter.

I tried to mill three teeth with equivalent distance around the boundary of one end of the rod with an angle grinder. After that I drilled a hole perpendicularly in the center of the rod. Taddaah... a working screwdriver!

Now let's begin the Teardown.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.