Skip to main content
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Now it's time to remove the digital logic board.

Remove the screw marked in red. The cable marked in blue (which I have already disconnected) and the cable marked in orange. Note: the cable in orange is oriented backwards from what you would expect based on where the cable goes. The yellow rectangle shows where the connector pins to the lower board are located.

Remove the side panel by removing all four screws.

Lastly, lift up on the logic board freeing it from the long pins that connect it to the main board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.