주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Once the boards, speakers, and micro-SD card reader have been disconnected, the frame is left sitting on top of the LCD-digitizer.

There are nine screws holding the frame in place.

Remove the frame and the LCD, micro USB jack, and digitizer can be accessed.

Take caution when removing the frame. The wire for the micro USB jack runs through the frame and needs to be walked through the holes by hand.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.