Remove the short medium screws
Remove the ground screw
Remove the heatsink screws and braces
Lift the front to remove
Do this slowly. The heatsinks are not screwed down and you may damage the fins if you use too much force.
This is the second time I've taken this apart. That's why there is no thermal paste on the chips. They do put paste on there. Too much in my opinion.
When putting back together, all the screw places are marked. If the hole doesn't have a marker, don't put a screw in it.
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.