메인 콘텐츠로 스킵하기
도움말
13단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the six screws on the logic board and five screws on the downconverter board.

The two screws located at the top of the down converter board(near the speaker) are larger screws than the other screws (with washers).

Gently lift the downconverter board and logic board out of the computer.

Using a flathead screwdriver, pry the plastic rivet off the board. Put the top half of the rivet back into the bottom half so it doesn’t get lost.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.