1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Holding onto the downconverter, press down on the black connector to separate the downconverter board from the logic board.
If you are returning the logic board to Apple refer to the parts database and remove the SDRAM, any cables, the modem, theAirPort Card, and I/O panel.
When reinstalling the logic board, make sure the antenna wire is not underneath the board.
« 이전
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기