주요 콘텐츠로 건너뛰기

iRobot Braava 380t Teardown

필요한 것

  1. iRobot Braava 380t Teardown, iRobot Braava 380t: 1 단계, 이미지 1개 중 1개
    • Flip over the Braava

    • Remove the 4 screws circled in red in the photo.

  2. iRobot Braava 380t Teardown: 2 단계, 이미지 1개 중 1개
    • Flip over the Bravva

    • Raise the cover, which should offer no resistance.

    • Disconnect the red and black wire plug.

    • Remove the cover.

  3. iRobot Braava 380t Teardown: 3 단계, 이미지 1개 중 1개
    • The robot is now open. Take the opportunity to clean the contactors on the front.

  4. iRobot Braava 380t Teardown: 4 단계, 이미지 1개 중 1개
    • To continue dismantling and gaining access to the motors, remove the stickers.

  5. iRobot Braava 380t Teardown: 5 단계, 이미지 1개 중 1개
    • The screws of the engine covers are then clearly visible.

  6. iRobot Braava 380t Teardown: 6 단계, 이미지 1개 중 1개
    • Remove the covers.

    • Do not try to pull the engine out at this time!

  7. iRobot Braava 380t Teardown: 7 단계, 이미지 1개 중 1개
    • Remove the wheel cover by turning it a few degrees.

  8. iRobot Braava 380t Teardown: 8 단계, 이미지 2개 중 1개 iRobot Braava 380t Teardown: 8 단계, 이미지 2개 중 2개
    • Remove the circlip using special pliers (cut here to be small enough)

    • Take out the wheels, and remove all the stuck hair and dirt.

  9. iRobot Braava 380t Teardown: 9 단계, 이미지 1개 중 1개
    • Undo the 2 screws. Next, remove the wheel guard.

  10. iRobot Braava 380t Teardown: 10 단계, 이미지 2개 중 1개 iRobot Braava 380t Teardown: 10 단계, 이미지 2개 중 2개
    • You can then take out the motor and possibly dismantle the gearbox. But it's no use, as I didn't find any hair inside.

결론

To reassemble your device, follow the instructions in reverse order.

다음 번역가들에게 특별히 감사 드립니다:

fr en

100%

이 번역인들은 저희가 세상을 수리하는 데 도움을 주고 있어요! 기여하시겠습니까?
번역 시작하기 ›

작성자

2다른 기여자 명과 함께

Bossard Nicolas

회원 가입일: 09/21/18

1,221 평판

안내서 6개를 작성함

댓글 한 개

댓글 쓰기

조회 통계:

지난 24시간: 3

지난 7일: 10

지난 30일: 31

전체 시간: 1,286