이 사용자는 아직 프로필을 작성하지 않았습니다.
질문
I replaced my iPhone 6 plus housing and everything works but service!says searching or no service and wifi works and it...
더 읽어보기답변
Sounds like your home buttons haunted!
더 읽어보기Example
더 읽어보기Maybe the anti dust mesh is not lined up correctly...which means every time you install an new camera even though it's working it's being cancels because it's not aligned in the phone correctly..what I would do is take the screen out and take the camera and earpiece out and check and see if you could see both holes one being small and one being bit larger.
더 읽어보기Sounds like maybe you have cancelation microphone sensor...2nd mic which is connected to your power/volume flex...if you cancelation mic is damaged or cloged it will cancel out all sounds.
더 읽어보기Loca glue is messy unless your buying them in sheet form then applied by machine...if you don't want glue in the backlight just remove it off the back before glueing but keep in mind it is vey delicate and in some cases people just resolder a new one.i used to do refurbishing and if you have the machines and you know the proper way to fix with no esd or particles then you can make some money.
더 읽어보기Yes looks like you just need an new lcd and doesn't look that bad...the phone is definitely fixable!
더 읽어보기I have seen worse but with small cracks comes Easyer damage that could possible damage the lcd/digitizer or both. I can say for sure a full assembly screen repair will fix it right up!
더 읽어보기My understanding is that if you pull the LCD connector before disconnecting the battery, that creates a sudden drop in voltage which will correspond to a sudden increase in amperage which blows the filter. I know that you mentioned that you didn't have the iPad powered on, but in the work of removing the screen, you may have pressed the power button at some point?
더 읽어보기Sounds like you damage the proximity sensor which is the front facing camera and it also has a mic which can be easily damage if your not careful I would try replacing and seeing if this fixes your problem
더 읽어보기Most likely there corrosion on the back of the lcd here^ and maybe cleaning with 99% alcohol may fix it or replacing will fix for sure!
더 읽어보기3 페이지 중 1
wassofrank
@wassofrank
169
평판
24
해결책
0
안내서
회원 가입일 10/31/15