이 사용자는 아직 프로필을 작성하지 않았습니다.
답변
Well on iPod 5 gen the jack is soldered on the mainboard.Its not that complicated if you know some basics of soldering but i recomend a repair shop its much safer.
더 읽어보기Hi.yes its possible but you need preheating machine and some wire and UV glue...so if you never did it before i dont recomend its much better to buy complete LCD it is a litlle bit more expensive but at least you will be sure that its ok...:)
더 읽어보기Hi.well that happens on LG G3 or G2 if you dont put isolation tape from the old LCd or put new one on the resistors where is the LCD conector.On the picture you can see where is marked that you need to isolate.
더 읽어보기I think first thing you need to try is to do a restore of the phone and than look for hardware faliure.
더 읽어보기Hi..that screw is making short circuit somwhere for sure but i think the most easy solution is to change the entire power button flex...because as you said you already demage it a bit.
더 읽어보기Hi.Try cleaning the headseat jack maybe you have something stucked inside some dust or something...if not the best way is to test it with another jack..:)
더 읽어보기Hi.Go to the mesagge setting and check if the Mesagge cneter number is corect for your provider.
더 읽어보기Many Apple iPhones have that problem...but problem is with the Wi Fi onboard chip...mabny times if you just open the phone and heat the chip with hot air wifi comes back on softwer will not solve this problem.
더 읽어보기Hi.Put it ni DFU mode and reset it and you will be fine...except data loss if you didnt have iCloud on...:)
더 읽어보기Hi.Did you try to enter the rcovery and wiping data?
더 읽어보기2 페이지 중 1