There's a ribbon that goes from the touchscreen/digitizer over the top of the lcd screen and slips into a connector clip. Really small!! This might have become lose,or actually broken. Also at the top of the lcd screen there's 3 little solder connectors ( ÷ and - ) if these solder become loose it will also prevent the screen from being responsive to the touch but display will work fine. Hope this helps
If using water you MUST ALLOW TO DRY 24 HOURS. If you did check your hoses, also go back and make sure u have the pre filter (one in the ball) securely in place.
How did u clean the filters?
If using water you MUST ALLOW TO DRY 24 HOURS. If you did check your hoses, also go back and make sure u have the pre filter (one in the ball) securely in place.
Hope this helps.
Just need to get a idea on this phone, the silver backing thats usually stuck to the mid frame, when pulling out the old lcd this also came with it.
My question is whether or not that needs to replaced?
Also it changes screens all on its on.
What size are these screws. Please
What size is thus screw please