귀하의 기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다
장바구니가 비어 있는 것 같습니다
Thank you for this very helpful guide! I suggest to skip steps 7 up to 16, which is much quicker and safer way, at least for the 2009 model. With that one remark, overall great guide.
Thanks a lot for this hint! You saved my macbook, when I failed to unscrew the fan because of one completely destroyed screw. Thanks to your comment I skipped steps 7-16 and went straight to replacing the magsafe board without problems. The spudger and some 3D imagination and done,
The steps from 7 up to 16, and then 19 and 20 are not necessary. It looks like Apple intentionally designed the shape in the corner around the magsafe connector, so that it can be replaced without disconnecting and unmounting the main board. Also, the placement of the two screws mounting the magsafe board confirms that - they are easily available. This is true at least for the 2009 model, which I've successfully repaired.
So you can skip the risky steps of disconnecting of all the main board connectors and go straight to unscrewing the magsafe connector. Then, having the spudger and some 3D imagination, you can remove the magsafe board with some 3D rotations. Same for mounting the new magsafe.
I've found out that crucial simplification only because I failed to unscrew the fan (broken a screw completely, while following this guide step by step). Then I found a comment from user grze under step 6, which saved my macbook by confirming, that 7 to 16 can be skipped.
초보 수리공 배지 획득
@ 12시 34분 47초
존 매든 배지 획득
@ 12시 31분 26초
댓글 "MacBook Unibody Model A1342 MagSafe Board Replacement"를/을 작성하였습니다.
@ 15시 53분 25초
MacBook Unibody Model A1342 MagSafe Board Replacement를/을 성공적으로 완성하였습니다.
@ 15시 50분 52초
댓글 "MacBook Unibody Model A1342 Rear Vent Replacement"를/을 작성하였습니다.
@ 15시 47분 49초
댓글 "MacBook Unibody Model A1342 Logic Board Replacement"를/을 작성하였습니다.
@ 15시 44분 24초
일단 획득하면, 귀하께서는 그들의 시간당 평판 획득 도표를 볼 수 있습니다.
도표가 어떻게 보여질지에 대한 미리보기입니다:
아직 획득한 평판이 없습니다.