귀하의 기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다
장바구니가 비어 있는 것 같습니다
This is the least helpful step of the guide, with the worst pictures.
Most of the adhesive is in fact on the top edge and bottom edge, and if you are careful you can reuse that too.
When the screen is broken and you are replacing it, the suction cup doesn't work so well.
I used 4 guitar picks and the spudger to get all the pieces out at one time. was a bit difficult. make sure you have a safe place for the glass if it's falling apart.
When inserting the spudger to separate the screen from the frame, use it on the sides due to the lack of glue in those areas makes it a lot easier to start the separation.
Be very careful as this area is also the most fragile of the frame.
When using the guitar picks make sure you are actually under the screen assembly.
I made the mistake of shoving it between the digitizer and the screen and it made it harder to take out until I corrected it.
additionally, there is a copper and metal mesh tape between the two ribbon cables that you will need to remove and transfer to the new one to keep the two cables together
일단 획득하면, 귀하께서는 그들의 시간당 평판 획득 도표를 볼 수 있습니다.
도표가 어떻게 보여질지에 대한 미리보기입니다:
아직 획득한 평판이 없습니다.