귀하의 기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다
장바구니가 비어 있는 것 같습니다
As noted above, almost all of the glue is on the top on bottom. Start in the middle on one side and slide your plastic tool or knife around the top first and then the other side. Save the bottom for last, as you will have to pry off the ribbon cables from inside the case as you finish removing the screen. The ribbon cables are secured pretty well inside the case, so pry slowly and carefully.
I found that a heat gun was extremely helpful in softening the glue on the top and bottom of the screen, as well as on the ribbon cables that are glued to the inside of the case. A hair dryer on high heat should help too if you don’t have a heat gun.
일단 획득하면, 귀하께서는 그들의 시간당 평판 획득 도표를 볼 수 있습니다.
도표가 어떻게 보여질지에 대한 미리보기입니다:
아직 획득한 평판이 없습니다.