Freedom is when?
Mech-E; trying to fix everything!
Yep; broke mine off too :P. Definitely read the comments. Gots to get under the wires and pull up from there.
In my case a spider had made its home in the lens opening in the drum which caused the unit to throw a 3000 error code. Removed the web with a pick and reassembled. That was the issue. Not kidding.
Folks, for an error 3000 (laser/lidar) issue check that the openings for both the laser and receiving lens are clear of obstructions. Spiders are known to climb into one or both ports on the drum and make webs/egg sacs in there. Remove with a toothpick or similar being careful not to damage the lens/laser. Not kidding. The belt and motor were fine; the web just obscured the lens opening in the drum.
As mentioned, some 3g phones there is a small metal clip holding down the camera (held in place by the screw there). Be sure it doesn't fly out or fall into the phone workings. Fine point tweezers would help here, to take it out and to put back in place during re-assembly.
일단 획득하면, 귀하께서는 그들의 시간당 평판 획득 도표를 볼 수 있습니다.
도표가 어떻게 보여질지에 대한 미리보기입니다:
아직 획득한 평판이 없습니다.