이 사용자는 아직 프로필을 작성하지 않았습니다.
답변
안내서 댓글
Bill Cole
@billcole
26
평판
1
해결책
0
안내서
회원 가입일 03/17/12
투표
1
0
회원 가입일 03/17/12
내 작업대
기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다
기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다
이 사용자는 아직 프로필을 작성하지 않았습니다.
If all you have are Phillips screwdrivers, be very careful with the screws at the split of the bottom case and all of the internal ones. You may have to drop to a Phillips #000 if you don’t have a JIS #00, which appears to be the correct tool for them, based on the actual fit of the bits in my (iFixit) set.
Note that the subwoofer case has 3prongs through which the camera cable is threaded. Remember to re-thread that cable through the prongs when re-assembling.
If you’re replacing the subwoofer, you DO need to remove the left screw but not the right screw. This is fortunate, because if you are stuck with a Phillips #00 instead of a JIS #00 screwdriver, you may well strip the heads of these screws.
Just “4 small tin marks” is what the the motherboard half of the subwoofer connector looks like.
You can get away with a Phillips #00 for many of the screws involved but the 4 at the bottom case split are likely to strip if you don’t use a JIS #00 or, in a pinch, a Phillips #000.
@billcole
26
평판
1
해결책
0
안내서
1
0