MacBook Pro late 2011 model. This laptop will NOT CHARGE the BATTERY. As soon as the battery dips below 95% , the laptop...

MacBook Pro early 2011 unibody A1278 A1322 I have purchased a new battery which was working once installed. This is the...

I'm following this thread... As my late 2011 MBP is the same! Here's my account of what I did: My MacBook Pro late 2011 not-turn-on problem SOLVED: Unibody Battery Indicator Light Board connector was unplugged & re-plugged in immediately. My unibody laptop had these symptoms... But none of the solutions below here worked this time: - battery would not charge - magsafe was not working properly and not charging battery - disconnect battery, hold power button for 5 seconds then connect with only magsafe and continue to hold power button for 10 seconds, did not work - battery indicator light did not work - SMC reset, PRam reset and fn-contro- command-power combo button press would not turn on MacBook Hope this helps someone... Update: the laptop did turn on a few times... But still not charging via the plugged in MacSafe charger. Once the battery reached about 30%, it shut off abruptly... Not shut down! Since then, it returned to square one. ..& would not turn on again

My MacBook Pro late 2011 not-turn-on problem SOLVED: '''Unibody Battery Indicator Light Board connector was unplugged & re-plugged in immediately. ''' My unibody laptop had these symptoms... But none of the solutions below here worked this time: - battery would not charge - magsafe was not working properly and not charging battery - disconnect battery, hold power button for 5 seconds then connect with only magsafe and continue to hold power button for 10 seconds, did not work - battery indicator light did not work - SMC reset, PRam reset and fn-contro- command-power combo button press would not turn on MacBook Hope this helps someone... Update: the laptop did turn on a few times... But still not charging via the plugged in macSafe charger. Once the battery reached about 30%, it shut off abruptly... Not shut down! Since then, it returned to square one. ..& would not turn on again

What about the type of thermal paste to use?

I've checked online, and the range from a couple of dollars to 10 times the price?

II've never used thermal paste before, so some suggestions or tips / hints would be great thanks 🙏

Cheers...

Hi, great tutorial thanks. Any recommendations or tips when buying the thermal paste?

Anything in particular to know about the best brands or type of paste?

Is there a guide on how to reapply the thermal paste?

…and where to buy the thermal paste?

Does the Google Pixel 2 have be powered off before removing the digitizer screen? Its not mentioned in this article...

Will the phone be damaged if the power is still on when disconnecting the broken screen?

FYI: I have a Google Pixel 2... not 2XL...

Does the phone have be powered off before removing the digitizer screen? Its not mentioned in this article...

Will the phone be damaged if the power is still on when disconnecting the broken screen?

FYI: I have a Google Pixel 2... not 2XL...

Does the phone have be powered off before removing the digitizer screen? Its not mentioned in this article...

Will the phone be damaged if the power is still on when disconnecting the broken screen?

MY carrier were giving out the regular sim cards where the micro sim could be removed from it as a pull out!

I saved the cutout & it works perfectly as a SIM adaptor! I might well go back & collect a couple more just in case!

In addition, I taped a piece of scotch tape on the non-connector side so that the micro SIM will sit still in the adaptor & still no problems fitting it back into my iphone 3GS.