귀하의 기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다
장바구니가 비어 있는 것 같습니다
It is very hard to detach the connector with the spudger. I tried forcing the connector out with the spudger by pushing on one side and then the other repeatedly. After several times it finally came out. A tool would be useful for this; there must be special plyers for doing this. Fingernails on either side seems most obvious, but maybe there is a downside to this ?
I used a microfiber cloth instead, which worked well. The same type as yo use to clean eye glasses, but in a larger form factor.
Rather old post, but anyhow, I have the same situation now. Will reinstall the old battery again to see if it is a battery issue or a broken circuitboard issue. How did it work out for you?
To install the battery it is not true that you do exactly the reverse.
One thing I struggled with was getting the battery connector back on. The trick I saw later on a video was to:
- First attach the connector, and after that
- Place the battery in the phone
The advantage of this is that the flat cable does not "work against" the connector when trying to click it back on. Would have saved me quiet some time.
존 매든 배지 획득
@ 12시 29분 55초
댓글 "iMac Intel 27" EMC 2429 Display Replacement"를/을 작성하였습니다.
@ 05시 08분 06초
댓글 "iMac Intel 27" EMC 2309 and 2374 Glass Panel Replacement"를/을 작성하였습니다.
@ 05시 04분 35초
iMac Intel 27" EMC 2429 Bluetooth Board Replacement를/을 성공적으로 완성하였습니다.
@ 05시 03분 22초
초보 수리공 배지 획득
@ 12시 29분 46초
iPhone 4S Battery Replacement를/을 성공적으로 완성하였습니다.
@ 09시 49분 06초
댓글 "iPhone 4S Battery Replacement"를/을 작성하였습니다.
@ 09시 47분 34초
@ 09시 44분 53초
DualShock 3 Trigger Buttons Replacement를/을 좋아요 하였습니다.
@ 02시 47분 51초
일단 획득하면, 귀하께서는 그들의 시간당 평판 획득 도표를 볼 수 있습니다.
도표가 어떻게 보여질지에 대한 미리보기입니다:
아직 획득한 평판이 없습니다.