tools needed *17mm socket *Sears sell a Craftsman 17mm Socket, 6 pt. Flex Sears Item# 00943208000 | Model# 43208 *10mm and 13mm open end wrench to remove the batt..*small flash light and About 60 minutes of time 1. First Remove the antifreez bottle, move it out of the way. 2. Remove the + and - cables from the battery 3. There are three wires attach to the starter (remover them) 4. Remove the bottom bolt holding the started 5. REMOVER THE INJECTORS WIRE HARNESS. there a clips holding the arness to the injectors/ take them off (try not to lose them) 6. Use a flashlight to look in the hold under the injector wire harness between the manlfold to locate the top bolt of the starter. 7. Use the 17mm flex socket on a 24inch extension just sit the socket on the bolt and turn it ( the socket will get stuck dont worry if will come free with you remove the starter. 8. Take a 15 minutes time out. 9. Now just work the starter out pointed end out first (between the brake booster and the anti freezz bottle.