비공개
해당 위키는 검색 결과에 나타나지 않지만, 누구나 볼 수 있습니다!
- Check your batteries are fully charged before takeoff.
- This includes both the flight pack in your drone as well as the batteries in your remote control! Find more information on batteries here.
- Conduct a 'nudge' test before takeoff, once the flight controller is armed.
- With some flight controllers (3DRobotics, DJI), the drone will respond to roll/tilt input before leaving the ground.
- Forward pitch should result in an increase in the rear motors speed.
- Left roll should result in an increase in the right motors speed.
- With some flight controllers (3DRobotics, DJI), the drone will respond to roll/tilt input before leaving the ground.
- Check vehicle indication lights and telemetry data if available.
- 3DRobotics and DJI flight controllers have indication lights for GPS and arm status.
- Errors in GPS, compass, and calibration are easy to spot with telemetry data.
댓글 2개
Excelente información.
manuelbeltran - 답글
Great List, there is also an article here which talks about the stuff you need before you leave, don't forget your SD or extra batteries like I did. http://dronewisdom.com/drone-checklist/
jbabin1 - 답글