학생-기여 위키
자사 교육 프로그램의 멋진 학생들이 이 위키를 만들었습니다.
Speaker Will Not Turn On
You want to use your speaker but it will not turn on.
Battery Is Not Fully Charged
Charge your battery for at least 8 hours to be sure that it is fully charged.
Defective Battery
Your battery may be defective. If your battery is defective, the speaker will not have enough power to turn on. You will want to use this guide to replace your battery.
Deteriorating Speaker Sound
Your device turns on but the speaker sound is not clear.
Dust Clogging Faceplate
There may be dust clogging the faceplate causing the speaker to have a muffled sound. Pry the speaker off to clean out the dust with a damp cloth.
Blown Speaker
If the speaker sound is distorted, then the speaker cone may be blown. This cannot be repaired and should be recycled properly.
Rattling Speaker
Your speaker on the device sounds clear but there is a rattling noise that distorts the sound.
High Volume
The volume may be too loud on the device causing it to rattle. Turn down the volume to a lower level.
Loose Faceplate
The faceplate is loose. Make sure the faceplate is pushed down. It may be necessary to glue the faceplate back down.
Device Not Pairing
Your speaker is turned on but you cannot get it to pair with another device.
Bluetooth is not turned on
If your unit will not pair to your music device, make sure that the Bluetooth is turned on for the device you are trying to pair. It may be necessary to reset the speaker. In order to reset your speaker press the following buttons: Volume -, Volume +, Speaker Phone button, and then the Bluetooth button.
Will not pair to more than one device
The device is unable to pair to more than one device at a time. The last device that paired to the Bluetooth speaker is the only one that will work at that time.
Loose Battery Door
The battery door is loose and could lead to further complications.
Loose Screws
If your battery door is loose it may be necessary to tighten the screws around the battery door. Make sure you use the correct size screw driver or you may strip the screws and make it unable for them to be tightened.
Broken Door
If there are no screws loose, there may be a visible break in the door. This cannot by fixed and may require replacement. Otherwise there could be further damage to the battery.
댓글 27개
When using the bluethood it has static noice or like white noise can you help me?
Richard - 답글
My TDK A34 will not turn on but battery is still good enough to recharge my cell phone. It is less the 4 months old.
Leah - 답글
My TDK A34 will automatically mutes while connected to bluetooth after 10 mins of maximum playtime..please help ..
Rizwan - 답글
BUMP. Same problem here, it's frustrating as !&&* and shouldn't be happening for a speaker this expensive. Shame on you TDK, you are no longer a trusted name for me or my friends.
Jack S -
Same problem Bluetooth is not.good, anybody has solution I regret buying
versed raina -
Same here!!! Same model also
Colby Hall -
Same thing here. Stays on for a few minutes then the sound stops but my apps such as YouTube and Spotify will continue playing the song and my Bluetooth continues to say it’s connected to the speaker. I don’t remember how much I paid for mine I wanna say around 200 from bestbuy. I’ve saved it over the years in hopes that one day it would work again. Still doesn’t.
Colby Hall -
Tell me about it… it now sells for 400$ On amazon. I don’t get why no one from their marketing department has reached out about these issues that are clearly plaguing all of this model.
Colby Hall -
Same %#*@ thing! I’ll never buy TDK again.
Jack S -
My speaker 'ticks' all the time - why??
Sarah Duckworth - 답글
Sound mutes if it's turned higher than 3 lights. If it is connected to wall outlet it will play at max volume
rolis.kungs - 답글
Same here any news how to solve???
Joao -
I am having the same issue, and… the smell of burnt electronics is there.. Plays fine plugged into wall vol all the way up but if I run it off battery it will only go to about 3 full solid orange dots and then it shuts off. It will run for a long time off battery, but I have to keep it low. 3 dots or less.. Any fix suggestions out there???
Chris -
SOLVED- I was having the issue where my speaker (a34) would stay connected via Bluetooth and or input but would only play to volume 3 then it would mute. I followed the steps showed in this link to manually reset the speaker. It’s working properly now. I don’t know what the burning smell is so I’m assuming that leaving it plugged in for the recommended 8 hours was something they tried back then and it clearly doesn’t work as the system overheats. It’s also waterproof so there’s like 0 ventilation going on. If anyone knows anything about the battery specs. They may know something more about why it’s getting so hot. But I think it’s just because they where in competition with other companies and released a crap product. Hope this helps! Here’s the Manuel reset steps url. It’s super easy takes 2 seconds. Idk if it’s safe though. Just smell it after you charge it haha. Bump
http://tdkperformance.host4kb.com/articl...
Colby Hall -
Bump (a34) SOLVED- I was having the issue where my speaker (a34) would stay connected via Bluetooth and or input but would only play to volume 3 then it would mute. I followed the steps showed in this link to manually reset the speaker. It’s working properly now. I don’t know what the burning smell is so I’m assuming that leaving it plugged in for the recommended 8 hours was something they tried back then and it clearly doesn’t work as the system overheats. It’s also waterproof so there’s like 0 ventilation going on. If anyone knows anything about the battery specs. They may know something more about why it’s getting so hot. But I think it’s just because they where in competition with other companies and released a crap product. Hope this helps! Here’s the Manuel reset steps url. It’s super easy takes 2 seconds. Idk if it’s safe though. Just smell it after you charge it haha.
http://tdkperformance.host4kb.com/articl...
Colby Hall -
Rolis (and Chris) — thanks for that info.
.
I have tried the RESET procedure, and the fix was only temporary — the symptom of ‘going silent’ returned, same as before.
.
This pattern which you describe — max volume available when plugged into wall, limited volume when running on battery — sounds like possibly a degraded battery (along with poor circuitry which demands voltage which would only be available from a battery in excellent condition) . I say that because my unit goes silent quickly when playing on battery at high volume — but it did _not_ do this when new!
Bob Kennedy -
My speaker will cause my playback to be choppy and lag out my computer but if I disconnect it the computer speaker works fine and the choppy behavior disappears. I think either I need some specific driver update, but I’ve updated things already so maybe I have a failing speaker or failing bluetooth card..? Any suggestions?
Cole Boogaart - 답글
Hello I bought trek max A34 1 year ago , Bluetooth is not turning on and if it does after 5 mins Bluetooth automatically turns off and then after pressing Bluetooth button again it does not turn on.please anybody can help?
versed raina - 답글
SOLVED- I was having the issue where my speaker (a34) would stay connected via Bluetooth and or input but would only play to volume 3 then it would mute. I followed the steps showed in this link to manually reset the speaker. It’s working properly now. I don’t know what the burning smell is so I’m assuming that leaving it plugged in for the recommended 8 hours was something they tried back then and it clearly doesn’t work as the system overheats. It’s also waterproof so there’s like 0 ventilation going on. If anyone knows anything about the battery specs. They may know something more about why it’s getting so hot. But I think it’s just because they where in competition with other companies and released a crap product. Hope this helps! Here’s the Manuel reset steps url. It’s super easy takes 2 seconds. Idk if it’s safe though. Just smell it after you charge it haha.
http://tdkperformance.host4kb.com/articl...
Colby Hall -
hello I bought trek max A34 1 year ago, Bluetooth is not working properly.it does not switch on normally ,and when it does it turns off automatically after 5 mins.pleas somebody help in this Bluetooth issue?
versed raina - 답글
SOLVED- I was having the issue where my speaker (a34) would stay connected via Bluetooth and or input but would only play to volume 3 then it would mute. I followed the steps showed in this link to manually reset the speaker. It’s working properly now. I don’t know the smell is so I’m assuming that leaving it plugged in for the recommended 8 hours was something they tried back then and it clearly doesn’t work as the system overheats. It’s also waterproof so there’s like 0 ventilation going on. If anyone knows anything about the battery specs. They may know something more about why it’s getting so hot. But I think it’s just because they where in competition with other companies and released a crap product. I remember I bought mine when wireless and waterproof speakers where just getting introduced. Hope this helps! Here’s the Manuel reset steps url. It’s super easy takes 2 seconds.
- Colby
http://tdkperformance.host4kb.com/articl...
Colby Hall - 답글
Received a pair of new Trek Micro A12 yesterday. Two speakers pairing OK, Bluetooth pairing OK. But after 10 minutes playing, one of the speakers shut itself off. Battery had a full night of charge…
what can I do to correct the situation other than returning the speaker?
Pierre Pelland - 답글
This thing sucks!!
cuong.ly - 답글
my PC thinks my Trek speaker is a headset
Gail Schaeffer - 답글
my trex A34 when paired with my HP Elitebook will pair but the laptop thinks its a headset. I can’t get it to play the audio so I can hear it
Gail Schaeffer - 답글
My speaker plays music in a lower volume and I don't know why its doing that.
Art By Malini - 답글
That's it all how do I know if my batteries are good in my TDK a33
James Schwartz - 답글