주요 콘텐츠로 건너뛰기
도움말

현재 버전 작성자: jayeff

텍스트:

Hi,
Do you get beeps if you remove the GPU card and then try starting the PC?
It should give a beep error code because there are no graphics adapters detected. (Award BIOS 1 long, 2 short, AMI BIOS 8 beeps, Phoenix BIOS 3-3-4 or 3-4-1)
Do you get 1 beep if you start the PC but still get no video signal?
-If so this means that it has passed POST and should be booting into Windows. (Unless you have Phoenix BIOS and then there is no beep for a successful POST - Award BIOS and AMI BIOS give a single beep for a successful POST))
+If so this means that it has passed POST and should be booting into Windows. (Unless you have Phoenix BIOS and then there is no beep for a successful POST - Award BIOS and AMI BIOS give a single beep for a successful POST)
If you determine that it is booting into Windows without a display, can you get into BIOS with a display?

현황:

open

편집자: jayeff

텍스트:

Hi,
Do you get beeps if you remove the GPU card and then try starting the PC?
-It should give an beep error code because there are no graphics adapters detected. (Award BIOS 1 long, 2 short, AMI BIOS 8 beeps, Phoenix BIOS 3-3-4 or 3-4-1)
+It should give a beep error code because there are no graphics adapters detected. (Award BIOS 1 long, 2 short, AMI BIOS 8 beeps, Phoenix BIOS 3-3-4 or 3-4-1)
Do you get 1 beep if you start the PC but still get no video signal?
If so this means that it has passed POST and should be booting into Windows. (Unless you have Phoenix BIOS and then there is no beep for a successful POST - Award BIOS and AMI BIOS give a single beep for a successful POST))
If you determine that it is booting into Windows without a display, can you get into BIOS with a display?

현황:

open

편집자: jayeff

텍스트:

Hi,
Do you get beeps if you remove the GPU card and then try starting the PC?
-It should give an error beep code because there are no graphics adapters detected.
+It should give an beep error code because there are no graphics adapters detected. (Award BIOS 1 long, 2 short, AMI BIOS 8 beeps, Phoenix BIOS 3-3-4 or 3-4-1)
Do you get 1 beep if you start the PC but still get no video signal?
If so this means that it has passed POST and should be booting into Windows. (Unless you have Phoenix BIOS and then there is no beep for a successful POST - Award BIOS and AMI BIOS give a single beep for a successful POST))
If you determine that it is booting into Windows without a display, can you get into BIOS with a display?

현황:

open

원본 게시물 작성자: jayeff

텍스트:

Hi,

Do you get beeps if you remove the GPU card and then try starting the PC?

It should give an error beep code because there are no graphics adapters detected.

Do you get 1 beep if you start the PC but still get no video signal?

If so this means that it has passed POST and should be booting into Windows. (Unless you have Phoenix BIOS and then there is no beep for a successful POST - Award BIOS and AMI BIOS give a single beep for a successful POST))

If you determine that it is booting into Windows without a display, can you get into BIOS with a display?

현황:

open