Your image of the charging port shows bent pins and possible missing ones as well. B1, B4, B9 are bent and B5, B8, B10 and B12 seems to be missing (broken off)
Here's a [link|https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/|link] that shows the pinout for a USB-C port that may help as it explains the functions of the pins.
You will have to replace the USB-C port.
As it is hard mounted on the motherboard you will need smd soldering skills and tools.
Search online for [link|https://www.ebay.com.au/itm/185002711947?chn=ps&_ul=AU&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&mkscid=101&itemid=185002711947&targetid=&device=c&mktype=pla&googleloc=9070608&poi=&campaignid=19657038905&mkgroupid=&rlsatarget=&abcId=9305372&merchantid=7364522&gclid=EAIaIQobChMImq-d-OOw_wIVR3grCh17Wwx5EAQYAiABEgIsl_D_BwE|Lenovo ThinkPad X1 Carbon 6th Gen USB-C charge port] (supplier example only) to find suppliers that suit you best.
Here's a link to the [link|https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary if you wish to replace the charge port.
+
+
if it still doesn't show that it is charging after the port has been replaced, what is the model number of the motherboard as printed on the board itself? The schematics will have to be found to find out what else was wrong
Your image of the charging port shows bent pins and possible missing ones as well. B1, B4, B9 are bent and B5, B8, B10 and B12 seems to be missing (broken off)
Here's a [link|https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/|link] that shows the pinout for a USB-C port that may help as it explains the functions of the pins.
You will have to replace the USB-C port.
-
As it is hard mounted on the motherboard you will need smd soldering skills and tools. Also finding the correct USB-C connector may be a problem.
+
As it is hard mounted on the motherboard you will need smd soldering skills and tools.
-
Search online for [https://www.ebay.com.au/itm/185002711947?chn=ps&_ul=AU&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&mkscid=101&itemid=185002711947&targetid=&device=c&mktype=pla&googleloc=9070608&poi=&campaignid=19657038905&mkgroupid=&rlsatarget=&abcId=9305372&merchantid=7364522&gclid=EAIaIQobChMImq-d-OOw_wIVR3grCh17Wwx5EAQYAiABEgIsl_D_BwE|Lenovo ThinkPad X1 Carbon 6th Gen USB-C charge port] (supplier example only) to find suppliers that suit you best.
+
Search online for [link|https://www.ebay.com.au/itm/185002711947?chn=ps&_ul=AU&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&mkscid=101&itemid=185002711947&targetid=&device=c&mktype=pla&googleloc=9070608&poi=&campaignid=19657038905&mkgroupid=&rlsatarget=&abcId=9305372&merchantid=7364522&gclid=EAIaIQobChMImq-d-OOw_wIVR3grCh17Wwx5EAQYAiABEgIsl_D_BwE|Lenovo ThinkPad X1 Carbon 6th Gen USB-C charge port] (supplier example only) to find suppliers that suit you best.
Here's a link to the [link|https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary if you wish to replace the charge port.
Your image of the charging port shows bent pins and possible missing ones as well. B1, B4, B9 are bent and B5, B8, B10 and B12 seems to be missing (broken off)
Here's a [link|https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/|link] that shows the pinout for a USB-C port that may help as it explains the functions of the pins.
You will have to replace the USB-C port.
As it is hard mounted on the motherboard you will need smd soldering skills and tools. Also finding the correct USB-C connector may be a problem.
-
They are all configured the same as far as pin spacing, size etcs are concerned although board mount orientation is a factor e.g. straight, 90° etc but not as far as the connector's board mount lugs position on the body of the connector is concerned. They have to match the position of the corresponding solder pads on the motherboard.
-
-
Search on places such as mouser.com and digikey.com to hopefully find a match
+
Search online for [https://www.ebay.com.au/itm/185002711947?chn=ps&_ul=AU&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&mkscid=101&itemid=185002711947&targetid=&device=c&mktype=pla&googleloc=9070608&poi=&campaignid=19657038905&mkgroupid=&rlsatarget=&abcId=9305372&merchantid=7364522&gclid=EAIaIQobChMImq-d-OOw_wIVR3grCh17Wwx5EAQYAiABEgIsl_D_BwE|Lenovo ThinkPad X1 Carbon 6th Gen USB-C charge port] (supplier example only) to find suppliers that suit you best.
Here's a link to the [link|https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary if you wish to replace the charge port.
Your image of the charging port shows bent pins and possible missing ones as well. B1, B4, B9 are bent and B5, B8, B10 and B12 seems to be missing (broken off)
Here's a [link|https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/|link] that shows the pinout for a USB-C port that may help as it explains the functions of the pins.
You will have to replace the USB-C port.
As it is hard mounted on the motherboard you will need smd soldering skills and tools. Also finding the correct USB-C connector may be a problem.
-
They are all configured the same as far as the pins are concerned but not as far as the connector's board mount lugs position on the body of the connector. They have to match the position of the corresponding solder pads on the motherboard.
+
They are all configured the same as far as pin spacing, size etcs are concerned although board mount orientation is a factor e.g. straight, 90° etc but not as far as the connector's board mount lugs position on the body of the connector is concerned. They have to match the position of the corresponding solder pads on the motherboard.
Search on places such as mouser.com and digikey.com to hopefully find a match
Here's a link to the [link|https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary if you wish to replace the charge port.
Your image of the charging port shows bent pins and possible missing ones as well. B1, B4, B9 are bent and B5, B8, B10 and B12 seems to be missing (broken off)
Here's a [link|https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/|link] that shows the pinout for a USB-C port that may help as it explains the functions of the pins.
You will have to replace the USB-C port.
As it is hard mounted on the motherboard you will need smd soldering skills and tools. Also finding the correct USB-C connector may be a problem.
They are all configured the same as far as the pins are concerned but not as far as the connector's board mount lugs position on the body of the connector. They have to match the position of the corresponding solder pads on the motherboard.
Search on places such as mouser.com and digikey.com to hopefully find a match
-
Here's a link to the [link|https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary of you wish to replace the charge port.
+
Here's a link to the [link|https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary if you wish to replace the charge port.
Your image of the charging port shows bent pins and possible missing ones as well. B1, B4, B9 are bent and B5, B8, B10 and B12 seems to be missing (broken off)
Here's a [link|https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/|link] that shows the pinout for a USB-C port that may help as it explains the functions of the pins.
You will have to replace the USB-C port.
-
As it is hard mounted to the motherboard you will need smd soldering skills and tools. Also finding the correct USB-C connector may be a problem.
+
As it is hard mounted on the motherboard you will need smd soldering skills and tools. Also finding the correct USB-C connector may be a problem.
They are all configured the same as far as the pins are concerned but not as far as the connector's board mount lugs position on the body of the connector. They have to match the position of the corresponding solder pads on the motherboard.
Search on places such as mouser.com and digikey.com to hopefully find a match
Here's a link to the [link|https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary of you wish to replace the charge port.
Your image of the charging port shows bent pins and possible missing ones as well. B1, B4, B9 are bent and B5, B8, B10 and B12 seems to be missing (broken off)
-
Here's a [https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/|link] that shows the pinout for a USB-C port that may help as it explains the functions of the pins.
+
Here's a [link|https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/|link] that shows the pinout for a USB-C port that may help as it explains the functions of the pins.
You will have to replace the USB-C port.
-
As it is hard mounted to the motherboard you will need smd soldering skills and tools. Also finding the correct USB-C connector may also be a problem.
+
As it is hard mounted to the motherboard you will need smd soldering skills and tools. Also finding the correct USB-C connector may be a problem.
-
They are all configured the same as far as the pins are concerned but not as far as the connector's board mount lugs.
+
They are all configured the same as far as the pins are concerned but not as far as the connector's board mount lugs position on the body of the connector. They have to match the position of the corresponding solder pads on the motherboard.
Search on places such as mouser.com and digikey.com to hopefully find a match
-
Here's a link to the [https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary of you wish to replace the charge port.
+
Here's a link to the [link|https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary of you wish to replace the charge port.
@littletech
Your image of the charging port shows bent pins and possible missing ones as well. B1, B4, B9 are bent and B5, B8, B10 and B12 seems to be missing (broken off)
Here's a [https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/|link] that shows the pinout for a USB-C port that may help as it explains the functions of the pins.
You will have to replace the USB-C port.
As it is hard mounted to the motherboard you will need smd soldering skills and tools. Also finding the correct USB-C connector may also be a problem.
They are all configured the same as far as the pins are concerned but not as far as the connector's board mount lugs.
Search on places such as mouser.com and digikey.com to hopefully find a match
Here's a link to the [https://download.lenovo.com/pccbbs/mobiles_pdf/x1_carbon_6thgen_hmm_en.pdf|hardware maintenance manual] that will also help as it details how to remove the systemboard which is necessary of you wish to replace the charge port.