원본 게시물 작성자: SparkWorx

텍스트:

Personally, I'd do the below:[br]
[br]
- Physically disconnect and reconnect cables from BOTH sides and ensure they're plugged in securely. [br]
- Swap the cables, if possible, and see if the issue follows the cable (which would indicate the cable is bad). [br]
- Try another monitor on the same PC, with the same cable, in the same port. [br]
[br]
Are you getting an image at all on the custom machine you built with ANY combination of monitors/cables/connections?

현황:

open