Sim Tray material short circuits?

Question

iPhone 5

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기

CSchnuffi5 @cschnuffi5

평판: 1

1

게시일: 2012년 9월 16일

옵션

Sim Tray material short circuits?

Hi,

I have a few questions about the SIM tray and hope that you can answer it to me.

1. Which material is this tray?

2. Is there any coat in the SIM area?

3. Is the tray conductible?

Backround to the questions.

My Provider an't deliver Nano-SIMs this year. So i cut my SIM to the Nano size. But not the SIM is a Full Chip SIM with no plastic frame.

Now i have the question if i could have short circuits and the sim is not working?

In my iPhone 4 with Adapter the card works fine.

I hope you can help me and a few other users.

Thanks

André

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 2개

Lucas @lucas63496 평판: 79 2 · Answer 1 · 2012-09-16T19:42:38-07:00

가장 유용한 답변

Lucas @lucas63496

평판: 79

2

게시일: 2012년 9월 16일

옵션

the material is Ti-alloy, so it can be conductible. the sim card should be surrounded by plastic for fear of short curcuit

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

JAW @jaw25981 평판: 1 · Answer 2 · 2012-11-17T18:00:31-07:00

I had this conductive sim tray problem with my iPhone4.

Solution is to use a thin coating of nail polish between the overlapping areas between the sim and the tray.

The nail polish, (clear coat/nail hardener -best option) works as an insulato, blocking conduction between the sim and the carrier.

Avoid lathering the nail polish, only a very thin painted coat is necessary. Make sure any excess nail polish is scraped gently away from the sim or sim carier. Too much polish will prevent insertion of the sim carrier back into phone, any excess left can flake off and float around the inside off the phone and may cause problems.

Do not cover the portion of the sim card that needs to connect with the contacts inside the phone.

Likewise if you have one of the early iPhone4 that had the attenna problem, you can paint the aluminium edge with polish thus preventing your fingers shorting out the attenna/reducing signal. This means you can use your early iPhone4 without a bumber case. Later iPhone don't have this problem.

iPhone 5

Sim Tray material short circuits?

답변 2개

귀하의 답변을 추가하세요