주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1966 질문 전체 보기
질문 마감됨

Power button not working after flex cable replacement

Hello,

I have an Iphone 3gs that the power button didn't work so, I replaced the flex cable thinking that it was bad. Wow, what a feat! I got the phone re-assembled and it still does not work. All of the other buttons, volume up/down, mute switch, headphone jack, work as they should. This is the same behavior that it was doing before I replaced the flex cable. Is there something on the logic board that is causing the issue? I don't want to go through the painstaking task of putting in another cable. Is there something else that I can try?

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

are you sure it makes good contact? sometimes i have to bend the 2 legs a little

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Yes, I double checked the connections. Like I said, the volume buttons, headphone jack and the mute switch all work just fine. It's just that darn power switch.

의견 추가하세요
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 483