주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기
질문 마감됨

Battery Replacement: screen will not come off

Hello,

Am stuck on step 2 of the guide -- the screen will not come off! I am pulling rather hard but not like a maniac. Anything I can do without destroying 1) the gasket 2) the screen 3) the phone?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

Hi, I know this is silly, but have u checked whether anything else is blocking the screw hole. Also sometimes it might be hard to get the screen out, if it is the first time that the phone is being opened. Ask someone to hold the phone while u pull, but be aware of the three cables which are still connected to the motherboard. Write back on how it went. Good luck.

댓글 달기

답변 1개

선택된 답변

Hi since this is your first time opening up the screen and touch panel with a suction cup, so it will be little hard, just try pulling abit harder but becareful of the three cable connecting to the touch panel and lcd, so open in a v formation, example like how you use your hand to imitate a crocodile mouth

open > close - open > close -, got it?, pivot the top part of the iPhone, hope this helps cheers!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 325