기기를 수리하세요 커뮤니티 상점

모델 A1046 또는 A1095 / 1280x854 스크린 해상도

118 질문 전체 보기

옵션

Computer will not power up when attaching printer or VGA monitor

I'm trying to add a remote VGA monitor and an HP5mp laser printer to my wife's Powerbook G4. I'm using a Mini Centronics to USB cable for the printer and the Apple adapter (DVI to VGA PN#603-3342) for the monitor. When either one is connected, it will not allow the Powerbook to start up. If you try to plug the USB into a running laptop the computer sparks and shuts down. (Quality protection built in). The wireless connection to a color printer works well but would like to use the HP for normal B&W printing.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

To be able to print on this old (but great printer), you'll need a bridge. I like the AsantePrint. You can probably get a good deal on eBay for this. Here's what it looks like: http://www.amazon.com/Asante-Micro-Asant...

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

옵션

You might be using a new USB 3 cable when you ned an old USB 1.0 version. You could try connecting a Self-Powered USB HUB your printer might be drawing too much current.

On a laptop that age (at least 7yrs) the solder joints on the ports could be cracked. . . if the unit is not working you have nothing to loose by a "DIY reflow" but that would be a difficult or advanced DIY - you'd have to strip the logic board out, carefully apply some new resin to the solder joints then apply heat or bake the board in an oven and reinstall it, with no guarantee that it would work any better (but such DIY "fixes" have/do work for a while).

How much time, effort you want to invest is up to you

If this answer was helpful please remember to mark it accepted.''

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

bgwine 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 219