기기를 수리하세요 커뮤니티 상점

5세대 iPhone. 수리는 간단하며 스크루드라이버, 비집는 도구 그리고 인내가 필요합니다. GSM/CDMA / 16, 32, 또는 64 GB / 검정색 또는 흰색.

2201 질문 전체 보기
질문 마감됨

옵션

Power Button does not work after flexcabel change

first off all i'm from switzerland. sorry for my bad english. 2 months after guarante my power button get stucked. it doesn't made click anymore. so i changed the flex cable including sensor. after the repair the power button clicked, but didn't work. the sensor didn't worked either. then i bought another flex cabel incl. sensor (a better quality).

and now the sensor works but the power button doesn't. It clicks but there is no reaction.

does anybody had the same problem?

im thankfull for every answer.

regards from zürich

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

It seems that you have to change it again...

[연계 제품이 누락 또는 비활성화 됨: IF182-004]

iPhone 4 Power & Lock Button Replacement

iPhone 4 Power & Sensor Cable Replacement

If this answer was helpful please remember to mark it accepted.

iPhone 4 Power & Lock Button 이미지

안내서

iPhone 4 Power & Lock Button Replacement

난이도:

어려움

—

15 - 30 minutes
iPhone 4 Power & Sensor Cable 이미지

안내서

iPhone 4 Power & Sensor Cable Replacement

난이도:

어려움

—

1 - 2 hours

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 5개:

sorry my mistake. i meant of course the power button (not home button). same answer? thx in advance

의

Answer corrected... ;-)

의

hello xgonin

thx for your update.

i replaced it now for the 3rd time.

and the power button works now. but..!! :(

the sensor works now backwards.. when i put my hand on it, the display appears and when i put my hands away, the display disappears.

do you have a solution? thx in advance. regards from zürich

의

i repaired the phone for the 4th time with another new flexcable. now its working well. failure was 3 not working felxcable. thx for support

의

you're welcome ! ;-)

의

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 7

전체 시간: 3,184