주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1502 질문 전체 보기
질문 마감됨

Where to order back cover iPhone 3GS?

Does anyone know a good back cover that fits probably? My white iPhone 3GS has some hairlines and cracks at the dock connector. Now I want to replace it with a black back cover, I will need a mute switch in black, sim tray in black and the back cover of course (maybe a dock connector?).

Anyone got experience with http://www.sw-box.com/wholesale-iPhone-3... ? Or know any shop where I can buy the stuff I need.

Thanks!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

Another side question. Anyone who did replace the back cover with succes? Was it hard to do? How does your phone look like now?

댓글 달기

답변 4개

가장 유용한 답변

The place you're looking only sells wholesale. You want a site that will sell the parts individually.

There is not much demand for this part, so your best bet is to get it from eBay or a parts phone if you have one with an unrelated problem.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Why shouldn't I buy http://www.sw-box.com/apple-iPhone-3gs-1... ? It includes Chrome Front Bezel, Battery Black Backing Cover, Volume Button, Camera Lens, Earphone Jack. If I buy the mute button and Sim tray I'm done?

Do you know any shop where they have good fitting back covers ?

댓글 달기

You're looking at a wholeseller only.

Get the part from Jack Telecom. They sell it in white or black.

Here's the back in black and white

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

You're looking at a wholeseller only.

Check Jack Telecom for the part. I can't link it here because of the spam filter, but it's the first link on Google. They have it black and white.

Here it is in white.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Put the link in and let's see if it gets filtered. But as the question is 4 years old, the issue has probably been settled.

댓글 달기

I bought 3rd party, looks fine. Seperating the bezel is simple, just pry it off and get some glue and stick it back down. there's also the headphone jack bezel and speaker mesh you will want to transfer. also, there's 2 metal pins in the case you will want to remove these and put them in the new one, and there's some other stuff you will see on the old case that are stuck down, you can just pry them up and put them back in place.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 4

전체 시간: 2,563