cold water only dribbles out
Hi,when my washer fills with cold water,it only dribbles out.
Hot water is fine....I've checked the incoming water and hoses and everything is fine....could an internal valve be faulty?
좋은 질문 입니까?
점수
1
117418
답변 1개
선택된 답변
평판: 685.4k
3.4k
1.1k
2.6k
If the washer fills very slowly, the water pressure from the house might be too low. If the pressure is good, try cleaning the screens inside the water inlet valve hose connection ports. If those are clean replace the water inlet valve.
해당 답변은 도움이 되었습니까?
점수
1
