Hi,
sorry for my language, I can't write in English fluently.
I have an iPhone 3GS 32 GB. Before I give him to my friend, It turns on, and work, but he don't have backlight. So I decided to repair It. I bought 6r8 coil and give It to my friend to solder It. After that, my phone won't turn on. I plug in It to my PC, trying DFU mode, and It's not working. Have anybody any solutions, how to repair it?
좋은 질문 입니까?
평판: 782.4k
1.1k
893
2.3k
Luke, I'd start of by inspecting the logic board. The coil is a bit of a pain to solder and unless one had lots of practice and the right tools, it could be possible that the soldering has caused a failure in any of the circuits. Check for bad solder joints, bridged solder etc.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 259
댓글 2개
try putting on wall charger for 1 hour and see if it boots, sometimes the battery connector isn't screwed in enough, dock connector (no4) is loose. Take the board out for 1 hour and then try again to reassemble and power up. oldturkey03 is spot on with his advice though.. :-)
pollytintop 의
I tried your advices, and it's not working..
Luke 의