처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1961 질문 전체 보기

Black screen after LCD replacement

My iPhone 3GS had a white screen with vertical stripes, so I have replaced the display. The power switch was broken, so I could not turn it off before changing it. I have also changed the rear case and the power switch. The repair went well, but now the display is completely black, with not backlight. The iPhone vibrates when the mute button is turned on and off, and it is recognized by iTunes. I checked that the connector #1 was correctly plugged. I've also tried to restore the iPhone but the screen is still black. Can this be fixed?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

3개의 답변

선택된 해법

try the ribbon cables

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

If you changed the screen before turning it off, it is a good possibility you have blown the lcd

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Thanks for your answer. Now that I have repaired the on/off button, how can I turn the iPhone off ? I have restored it, but since the LCD isn't working I am not sure in which state it is right now. It still vibrates, so I am sure it's on though.

의 답변

의견 추가하세요

Hi Seb,

You have probably not connected the ribbon cables properly.

Corbin

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Sébastien Maret 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 406