주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기

Small part dropped out during repair, where does it go?

Hi, I recently tried to install a new screen in my iphone and during re-assembly a small silver clip about 4mm long dropped out, I have looked at all the 4 exploded views I can find, and that part is never there.

Also cant get the face sensor to work at all. It didn't before i put this new screen on, i was hoping this screen would fix that. Tried all the basic tricks (no screen protector, network reboot, the tape & sharpy trick) but it still does not work!

Any and all help welcome!

Thanks. st3fan

Block Image

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

the part sits on top of the wifi antenna, it makes contact with the screw and board.

Block Image

about the proximity sensor. try the "squares cut out black tape" thing with and without the uv sticker. i have been able to get every single one working :-)

Block Image

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Thanks a lot :) I'll try the black tape thing today :)

댓글 달기

귀하의 답변을 추가하세요

st3fan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 205