기기를 수리하세요 커뮤니티 상점

2.2, 2.4, 2.5, 또는 2.6 GHz Core 2 Duo 프로세서

759 질문 전체 보기
질문 마감됨

옵션

After Replacing HD the Fan is Always on

I replaced the original 120 gb 5400 rpm drive which was making a lot of noise in my A1226 with a 320 Gig Seagate 7200 RPM drive. Since that time the fan runs constantly from Boot. Before this, It would run depending on how hard the CPU was running, but now if everything is Idle the fan will still runs.

The only thing I can think of is I did not do a clean install on the new Drive I just copied off a Super duper archive, but I may be wrong about that.

Any thoughts?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Did you connect the heat sensor back on logic board?

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 2개:

I didn't remember taking it off. I did just check the Hard drive replacement instructions and the Heat Sink Replacement instructions and the Sensor Cable is nowhere near where I was working, unless thre is another cable I don't know about.

의

Try this

http://support.apple.com/kb/HT3964?viewl...

or this

http://support.apple.com/kb/HT1379

At last try AHT (apple hardware test) and tell us what errors is giving.

If nothing instal smc fan control and adjust minimal rpm manualy

의

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,522