메인 콘텐츠로 스킵하기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1505 질문 전체 보기

Display works perfect, but glass is broken - which parts are needed?

I would like to repair my broken display. It works perfect. Everything is okay only the glass has a crack. Which parts do I need? Only the display or also the frame?

Best

Dalberg0

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

2개의 답변

선택된 해법

It sounds like you only need to replace the digitiser. This is stuck to the LCD and requires some skill to seperate and stick the new one on. Be sure to wear eye protection when removing the cracked one.

Here's the instructions : iPhone 3G Front Panel Replacement

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Also take care with the ribbon cable attachment of the digitizer to the main PCB. If you damage whee the digitizer attached to the main PCB, you can just stop, as it's all over.

I've seen iPhones like that show physical damage on the inside. Once the digitizer was out, the dock connector *fell* out. The impact that shattered the glass, broke all the solder joints of the dock connector. The bizarre thing was the dock connector worked prior to disassembly, as it was sandwiched in, until we took the digitizer out.

Good Luck!

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Wolfgang Laubersheimer 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 667