물건을 수리하세요 커뮤니티 상점
수리 커뮤니티 가입 - 계정 만들기

1.83 GHz Core Duo 또는 1.83, 2, 또는 2.16 GHz Core 2 Duo A1208 (EMC 2104/2110/2114/2124)

20 질문 전체 보기 | 21 부품 둘러보기

옵션

macmods adapter - use

Hi, Im using the macmods adapter and have some questions, (Im apologize about my english):

Do someone knows if its ok to connect to 1 tube lcd an inverter designed to feed 2 tubes?

The imac intel inverter its connected to a original 2 tubes lcd, but the macmood includes an Y adapter to use a single tube lcd as replacement, I notice that the one tube lcd I use goes to hot on the bottom (where the tube is placed) and perhaps is cause the inverter doubles the current nedded for the tube.

I dont know to test it, I mean how to measure and compare the original current on the 2 tubes lcd vs the 1 tube replacement lcd.

Thanks a lot

Alvaro from Uruguay

답변되었습니다! 답변 보기 저도 같은 문제가 있습니다

좋은 질문입니까?

예 아니요
점수 -1
댓글 1개

It might help if you can give us more information about the macmods part (post a couple of images) and where you got that part from.

의

댓글 달기

답변 1개

필터 기준:
가장 유용함 가장 최근 가장 오래된
선택된 해법

옵션

I think this is a question you should be asking the vendor/manufacturer. You'd be much more likely to have people with experience and knowledge of this 3rd party hardware there than here.

If this Answer is helpful please remember to return and mark it Accepted.

이 답변이 도움이 되었나요?

예 아니요
점수 1
댓글 달기

답변을 추가하세요

Alvaro B 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 5

전체 시간: 135