주요 콘텐츠로 건너뛰기

Power Mac은 G3, G4 및 G5 모델을 포함합니다.

447 질문 전체 보기

Boot Chime, but no video on monitor.

After changing my PRAM battery, the powermac booted up normally showing me a question mark on the screen. Turned it off and turned it on again after a short time, however this time it started up but nothing showed up on the monitor. What could this be ?

Thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

The first question mark showed that it could not find a operating system. Either corrupt system folder or a failed hard drive. I would check and reseat the video card. A black screen can also result from a drained battery or improperly installed battery.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

Yes that is when i turned off the mac to get an OS to try and install it. Tried reseating the video card but no luck. Tried taking out the PRAM battery and putting it back in but no luck. Before when i had the dead battery, it wasnt doing the chime, but now it is. Could it still be the battery ?

Hook up another machine to the monitor and see if it has failed.

댓글 달기

귀하의 답변을 추가하세요

julianbugejacoster 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 9

전체 시간: 527