메인 콘텐츠로 스킵하기

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

215 질문 전체 보기

Why wiill it not boot after new digitizer fitted?

I have just replaced a digitizer front screen on a friends iPad 4.

It was working fine before I did this, the screen was just cracked.

Now I get [NAND] find flash media and keepout 601 physical block off set .... there are about 5 to 6 lines all starting with NAND, The Apple logo is in the centre of the screen.

The only way I can turn the machine off is holding down the home button and sleep bottom together.

Help! Many thanks Dan

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

check my answer below

의 답변

의견 추가하세요

3개의 답변

가장 유용한 답변

we have the same problems please help!

해당 답변은 도움이 되었습니까?

점수 1

댓글:

looook below!!!!!!

의 답변

의견 추가하세요

you want an answer ,??? no prob!! check the 3rd connector of camera disconnect it ,remove battery ,reassemble it again W/O THE CAMERA CONNECTOR IN !! and try

if still issue remains ---try a new lcd full set! and if its still with the nand error of kernel panic !!!

check the------------->>>> u2 chip!!!!!!!!!! and cover the whole board with tape so that there wont be any connection to the back lcd bezzel aluminium cover!!

http://i00.i.aliimg.com/img/pb/465/292/6...

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Has anyone tried this fix from Masta at all and can you advise more on method and outcome please?

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Dan 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 363