How do I remove the rear case on a Zeepad FlytouchX Tablet?

Question

태블릿

대부분의 태블릿 컴퓨터 수리. 태블릿은 크기가 작고 빈번한 접착제 사용으로 인하여 태블릿 수리는 노트북 수리보다 더 까다롭습니다,

18908 질문 전체 보기

질문 마감됨

Jay Reynolds @jayreynolds

평판: 11

게시일: 2013년 10월 8일

옵션

How do I remove the rear case on a Zeepad FlytouchX Tablet?

This FlytouchX tablet is the 9.7 inch tablet as seen at this URL = http://www.zeepad.net/flytouch%20X.html

It has two problems:

1. Charge jack needs repaired.

2. The tablet USB connection is not recognized on any of three different notebook PCs. Since USB is faulty I can not update its USB driver.

Any help would be appreciated.

Jay Reynolds

reynoldsj8@outlook.com

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 1개

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas?

Jay Reynolds

Jay Reynolds 의 2013년 10월 9일

댓글 달기

답변 1개

선택된 답변

mayer @mayer

평판: 685.3k

MacHale Enterprises

3.4k

1.1k

2.6k

게시일: 2013년 10월 8일

옵션

Here's a video on tearing it down: http://www.youtube.com/watch?v=53lF0XAFY...

Here's how to just take the back off: http://www.androidtablets.net/forum/gome...

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 3개:

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds

Jay Reynolds, 18 seconds ago

Jay Reynolds 의 2013년 10월 9일

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds Jay Reynolds, 18 seconds ago

Jay Reynolds 의 2013년 10월 10일

Sorry! An hour of searching netted me nothing on repairing, teardown or battery replacement.

mayer 의 2013년 10월 10일

댓글 달기

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas?

Jay Reynolds — Jay Reynolds
Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds

Jay Reynolds, 18 seconds ago — Jay Reynolds
Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds Jay Reynolds, 18 seconds ago — Jay Reynolds
Sorry! An hour of searching netted me nothing on repairing, teardown or battery replacement. — mayer