주요 콘텐츠로 건너뛰기

5세대 iPhone. 수리는 간단하며 스크루드라이버, 비집는 도구 그리고 인내가 필요합니다. GSM/CDMA / 16, 32, 또는 64 GB / 검정색 또는 흰색.

3009 질문 전체 보기

Why is my screen blank after power button repair?

Hello!!!

I carried out a power button repair on my iphone to which I thought had been a success. Prior to putting the phone back together the power button was clicking perfectly, after assembling the phone to which I have a sharp eye and nothing was missing or not put back as it should of been but the screen is now not working. The backlight is functioning, and I can hear the power button working etc, but for some reason the screen is not displaying.

Any thoughts or advice would be greatly appreciated.

Regards

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

I'm having exactly the same issue right now. the backlight is coming on but the screen will not.

의 답변

의견 추가하세요

안드로이드 수리 키트

A new screen or battery is one kit away.

지금 장보기

안드로이드 수리 키트

A new screen or battery is one kit away.

지금 장보기

2개의 답변

선택된 해법

When you installed the new power flex cable did you remove the lcd? If you did not then you likely damaged the lcd cable when you bent it out of the way to remove the screws for the power button. I always remove the lcd when I do this repair. I have never had this issue.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

Thanks Craig, upon installing a new LCD display I've found that in actual fact I must of damaged the digitizer cable. I shall remove the LCD in future!

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Gordon 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 224