주요 콘텐츠로 건너뛰기

모델 번호 A1238 / 80, 120, 또는160GB 하드 드라이브 / 검정색 또는 은색 금속 외형

904 질문 전체 보기

reassembling iPod particularily the wire connecting to the headphone

hi ive successfully disassembled my iPod classic 80gb and now while trying to put it back together the sticky adhesive holding the wire that connects to the headphone jack is not so sticky anymore. I was wondering how you may suggest doing this tricky part, because now that the adhesive no longer works when i try to just sit it in its place and flip the hard drive over it always falls out of position.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

since the adhesive is only there to hold the ribbon cable in place, i would use a scotch tape to fixate the position of the cable

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

matt p 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,407