주요 콘텐츠로 건너뛰기

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 질문 전체 보기

LCD flickering after digitizer replacement. Tried new LCD, still same.

The LCD had no issues when the customer brought in the ipad mini. When I replaced the digitizer, the lcd was all greyed out and 2 black lines running down the middle. I assumed it was a bad LCD so I tried a new one and the same problem persists. Could this be a board issue? If so, is there a fix?

Tried hard reset, same issue.

Original LCD http://imgur.com/tonBntl

New LCD http://imgur.com/NZk3zeS (red is to protect customors identity, not on actual lcd)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 2개

This is probably a logic board issue. What most likely happened is that a connector was damaged. You may need to replace it.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Thanks, that's what we thought. We'll try apple and see what they have to say.

댓글 달기

Were you able to fix your problem? I am confronting the same issue. The screen is flickering(the image jump and jump all over the screen) Both LCD I have tested so far are broken inside, so I don't know if this flickering is caused by the broken LCD or by the connector.

Let me know, thanks!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Robert 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 15

전체 시간: 1,057