물건을 수리하세요 커뮤니티 상점
수리 커뮤니티 가입 - 계정 만들기

Model No. A1367 / 8, 16, 32, or 64 GB capacity

20 질문 전체 보기 | 17 부품 둘러보기

옵션

Screen won't attatch completely

My screen cracked a while back and I wanted to do the replacement my self. I did everything right, I tested it and it works fine. I'm on the last step of attaching the screen but it won't attatch completely. The left side lays flat perfectly fine but the middle right doesn't. It's still lifted up, like there's something underneath but I don't see anything. The metal plate beneath looks level. Idk what it could be, I don't want to risk cracking it by pressing really hard down on the screen. Any suggestions?

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

예 아니요
점수 -1
댓글 달기

답변 1개

필터 기준:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

you will crack it if you press too hard, it should lie perfectly flat by itself.

there are several thread here that address that if you search for them, but in essence:

1.) Dremel tool any corner dings or it will never fit.

2.) Consider removing the metal bracket to get a better fit.

3.) Make sure all the screws are in their right places--the slight variations in height is sometimes responsible

4.) Make sure the metal bracket is seated properly, and check that the dock connector and headphone jacks are not interfering.

And know that you are not alone---getting the iPod screen flat is a PITA!!!

jessa

이 답변이 도움이 되었나요?

예 아니요
점수 1
댓글 달기

답변을 추가하세요

autumn 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 79