기기를 수리하세요 커뮤니티 상점

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 질문 전체 보기

옵션

unpugged lcd cable while on after doing a tast after replacing screen!

Hello!

I hope I can find help...

1. cracked screen, ordered cheap one, everything was working fine when I did the test, OK well the on/off button didn't work, but hey I can live with it.

2. unplugged the LCD while it was on (can't turn it off) to seal the digitizer connection.

3. closed it all up, and it doesn't work.

What I am hoping for, is ... I let it run out of battery and then after charging it, it will come back on...

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Ohhh no, more than likely you blew your backlight and now will need to repair the coils and i think it's the r2 chip. If you can't power off try holding a magnet on the left hand side by the volume button if the mag strip is still working then that will put it to sleep. While the magnet is in place then it is safe to remove the digi and LCD

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

ipadproblem 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 74