Lumia 625 completely dead after digitizer replacement

Question

Nokia Lumia 625

Part of Nokia's Lumia line of Windows smartphones. Announced July 2013.

35 질문 전체 보기

smithbyrne @smithbyrne61323

평판: 71

2

3

게시일: 2014년 2월 15일

옵션

Lumia 625 completely dead after digitizer replacement

Hi there,

II replaced a digitizer on a lumia 625 today.

The phone was working fine when it came to me, just had a cracked digitizer.

After the repair, the phone would not power back on. No signs of life whatsoever.

I have a wall charger for USB devices that has LED lights that indicate when the power is going to the device and those LED did not change colour when i connected the Lumia 625.

The computer did not detect the device either.

I put the original (cracked) digitizer back on the phone but still no life.

I have tried all the combinations of keys for soft and hard resets but still no response whatsoever.

Has anyone had any similar problems with the Lumia 625 or any lumia for that matter?

can anyone please shed some light on this for me ?

thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 1개:

hey guys, got mine a new flex cable, battery and the charge dock board from ebay, replaced them but the phone cannot even start, or charge. I really cannot dump this phone. i need it working

Any help i will appreciate

Maxmm 의 2017년 4월 5일

댓글 달기

답변 3개

hey guys, got mine a new flex cable, battery and the charge dock board from ebay, replaced them but the phone cannot even start, or charge. I really cannot dump this phone. i need it working

Any help i will appreciate — Maxmm

ward decru @warddecru 평판: 1 · Answer 1 · 2014-02-24T08:40:13-07:00

ward decru @warddecru

평판: 1

게시일: 2014년 2월 24일

옵션

The flex cable is damaged then. Need to put in a new flex cable

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 3개:

thanks, which ribbon though ? the digitizer ribbon and the battery ribbon are attached to their respective parts

smithbyrne 의 2014년 2월 26일

The ribbon that connects the two motherboards and the start and volume buttons. it's glued to the frame and even the smallest of crack can break it.

ward decru 의 2014년 2월 27일

again, thanks for all your help much appreciated.

I will try replace this ribbon, bt could you possibly link me to somewhere that sells it ? I don't really know the technical name for it and I have tried entering "lumia 625 motherboard ribbon" into ebay with no results. So do you know the proper name for it ?

I'm in Ireland BTW

thanks

smithbyrne 의 2014년 2월 28일

댓글 달기