주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기
질문 마감됨

iPhone 5 shuts down after disassembly

I have replaced the back cover and screen on an iPhone 5 due to a broken screen and back cover with scratches and dents.

It worked fine before but after the replacement the phone will not stay on. It shuts down randomly and then I have to turn it back on.

Any ideas?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

The best way to move the battery for a iPhone 5 is to pry from the volume keys side this way you don't risk damage to the motherboard if you apply heat from a heat gum or hair dryer on the rear of the iPhone 5 were the battery is the battery will come out no problem.. If you do it without heat you risk bending or damaging the battery..

In your case I would try another battery if that has the same affect you could have damaged the motherboard

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Ok, I will order a new battery and hope that solves the issue. Thanks a lot.

댓글 달기

You may have damaged the battery when prying out.. Did you pry it out on the logic board side?

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

I started from the logic board side very gently. It did not move, so i moved to the top of the phone instead.

No problem glad to be of help..

Update us on how you get on

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 95