기기를 수리하세요 커뮤니티 상점

GSM iPad 2 with 16, 32, or 64 GB of storage, and a Dual Core A5 Processor. Model Number A1396. Repair is complicated and requires heat and prying.

152 질문 전체 보기

옵션

LCD projects the image at a very low luminosity

hello everyone,

I started repairing an iPad 2 generation digitiser, in order to take it out of it's place, I took out the LCD. When I tried to hook it back to it's place the LCD will show the home screen with really low luminosity (you can only see it with the reflex) I didn't touch anything and I payed a lot of attention in extracting the LCD. What happened? Do I have to buy a new LCD? will the problem be fixed when the digitiser will be at it's place?

Please help me,

Nicolo

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

If you feel confident you didn't damage anything when repairing the device I would reccomend going over cable connections again to ensure you have properly seated all cables correctly. Check the display brightness setting as well to ensure it wasn't lowered for whatever reason.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

Also, If the ipad was not turned off during repairs (always power off devices before you open them) when the LCD is disconnected sometimes it wont function properly after reinstall. disconnect the battery for a few seconds via the cable connecting the power board to the main board. you may also try a hard reset. This has cured the same issue for me many times.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

nicolo 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 100