주요 콘텐츠로 건너뛰기

First-generation Apple iPad with 3G capabilities. Model Number A1337. Available with 16, 32, or 64 GB of storage. Repairs are straightforward and do not require heat.

71 질문 전체 보기

Isolate the Back cover of the iPad

Hi,

I want to color anodize my iPad.

In order too do so, I need to isolate the back cover of the iPad from any non metal part (remove all electronics, plastic, buttons, Apple logo etc...) so that I can place it in an anodizing bath. As it needs to be completely immersed in a chemical bath to do the anodizing, I really need to get the aluminium part only!

Do you think it is do-able without any damage, if yes, how hard do you think it would be?

Thank You,

Nils

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 4개

가장 유용한 답변

hi nils,

i think this should be no problem at all - if you look at the pictures you can see the screws and clips - it's from apple, so my first guess would always be: screws, clips and a lot of adhesive ;-)

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Try this

iPad Teardown

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Thank you for the link.

My question was once you get to the end of this teardown, is it possible to remove the apple logo, and the buttons from the alumnium piece?

Thank you,

Nils

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

I know from my old 1st gen iPhone the logo was just lightly glued in.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Nils Hayat 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 3,966