주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

Only front panel comes off when opening, instead of entire screen?

Some time ago my phone died, and because it is quite old, I think the battery is at the and of it's life cycle. I tried opening the phone to take a look at the battery. Following the instructions on this site, I removed the two screws at the bottom and used a suction cub to lift the screen. But instead of the entire screen, only the front glass comes off.

It should open like this:

http://i921.photobucket.com/albums/ad53/...

But mine opens like this:

http://i921.photobucket.com/albums/ad53/...

I tried using glue to keep it together, but the glue wasn't strong enough. I also tried using an adhesive sticker (http://www.gultek.eu/images/P/iPhone%203...), but it isn't strong enough either (maybe the glue remains keep the sticker from sticking properly).

Is there any other way to get to the battery?

Thanks a lot in advance!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 2개

선택된 답변

I used a very thin piece of metal to get between the outermost rubber edge and the chrome edge, and then pry it open. This way I could lift the LCD screen without using a suction cub to lift it together with the front panel.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

the glass is usually attached to a plastic frame that screws into the lcd frame and clips into the sides, dig deeper. if you cant get it to stick back on you might have to replace it too, but removing the screen is the only way into the phone

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

How do you mean 'dig deeper'?

댓글 달기

귀하의 답변을 추가하세요

Luuk 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 115